Premium
CO 2 capture by antisublimation process and its technical economic analysis
Author(s) -
Pan Xueqin,
Clodic Denis,
Toubassy Joseph
Publication year - 2013
Publication title -
greenhouse gases: science and technology
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.45
H-Index - 32
ISSN - 2152-3878
DOI - 10.1002/ghg.1313
Subject(s) - flue gas , heat exchanger , waste management , coal , environmental science , process engineering , chemistry , engineering , mechanical engineering
CO 2 capture by antisublimation consists in cooling the flue gases down to the freezing temperature of CO 2 and frosting CO 2 on a low temperature heat exchanger surface at a temperature range defined by the CO 2 concentration in the flue gases and the CO 2 capture efficiency. CO 2 is then defrosted and recovered in a liquid state. This CO 2 capture process by antisublimation is called AnSU®. The CO 2 frosting temperature in flue gases is much lower than the triple point of water and therefore before CO 2 capture, water contained in flue gases is removed to reach high purity CO 2 . This paper presents an overview of the antisublimation process and a brief review of test benches that have been set up in laboratory and on industry sites for validation and optimization of the antisublimation process dating back to the first one constructed in 2003. Energy consumption and cost penalty of CO 2 capture by antisublimation are evaluated for a coal‐fired power plant. A technical and economic analysis has been made and compared to CO 2 capture by oxycombustion for a cement plant. Those two processes can be seen as cryogenics options and the detailed comparison gives insight into where energy losses take place and which capture process could be most adapted depending on specifications of the cement industry. © 2012 Society of Chemical Industry and John Wiley & Sons, Ltd