Premium
Plasma Sputtering Deposition of PEMFC Porous Carbon Platinum Electrodes
Author(s) -
Rabat H.,
Brault P.
Publication year - 2008
Publication title -
fuel cells
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.485
H-Index - 69
eISSN - 1615-6854
pISSN - 1615-6846
DOI - 10.1002/fuce.200700036
Subject(s) - proton exchange membrane fuel cell , platinum , materials science , membrane electrode assembly , carbon fibers , electrode , sputtering , chemical engineering , membrane , catalysis , porosity , deposition (geology) , layer (electronics) , open circuit voltage , analytical chemistry (journal) , thin film , composite material , nanotechnology , chemistry , chromatography , voltage , electrolyte , organic chemistry , composite number , engineering , biology , paleontology , biochemistry , quantum mechanics , physics , sediment
A novel method is proposed to fabricate the active catalytic layers of proton exchange membrane fuel cells (PEMFC). A plasma sputtering technique is used to deposit a porous columnar carbon film (column diameter of 20 nm) followed by the catalyst (platinum) deposition directly on the proton‐conducting membrane. The study of Pt diffusion shows that the optimised catalysed layers correspond to low plasma pressure operation (0.5 Pa) below a platinum loading limit of about 90 μg cm –2 . The initial carbon porosity is then maintained and Pt nanoparticles are present in all parts of the carbon layer. A membrane electrode assembly (MEA) is then achieved by alternate depositions of carbon and platinum onto both sides of the membrane. The results show the importance of the porous carbon structure. A significant increase in the catalyst efficiency is observed compared to a commercial fuel cell when measuring open circuit voltage.