Premium
Laboratory based continuous bedload monitoring in a model retention basin: Application of time domain reflectometry
Author(s) -
Miyata Shusuke,
Fujita Masaharu
Publication year - 2018
Publication title -
earth surface processes and landforms
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.294
H-Index - 127
eISSN - 1096-9837
pISSN - 0197-9337
DOI - 10.1002/esp.4358
Subject(s) - flume , bed load , reflectometry , geology , sediment , sediment transport , hydrology (agriculture) , time domain , soil science , geotechnical engineering , geomorphology , flow (mathematics) , geometry , mathematics , computer science , computer vision
In this study, we applied time domain reflectometry (TDR) to determine the deposition height and porosity of sediment at a fine spatiotemporal resolution, and developed a continuous bedload monitoring method that can be applied to pools in steep mountain rivers. The TDR monitoring system consisted of sensor probes, a cable tester, multiplexers and coaxial cables. When the embedded probes penetrated both water and sediment, the boundaries of the sediment and water were consistent with the transition points in the observed waveforms of each TDR measurement. A semi‐automatic analysis of the recorded TDR waveforms, which did not require calibration or parameter fitting, was conducted to establish continuous monitoring. In addition, a flume experiment was performed to test the monitoring system in a model retention basin connected to a flume, with sand of uniform grain size (1.4 mm diameter) supplied for 30 min. The sediment volume in the container representing the model basin was monitored using a load cell underlying the container and eight sensor probes, with a length of almost 0.27 m. The sediment thickness determined by the TDR indicated a gradual deposition, and was consistent with manual measurements. Despite a marginal overestimation of 13% for a sand feed of 30 kg, the sediment volume in the model retention basin and the bedload transport rate were successfully estimated. A combination of our monitoring system and other indirect methods, such as geophones, can potentially serve as useful tools for better understanding bedload transport processes in steep mountain streams. Copyright © 2018 John Wiley & Sons, Ltd.