Premium
Effects of sediment load on hydraulics of overland flow on steep slopes
Author(s) -
Zhang Guanghui,
Shen Ruichang,
Luo Rongting,
Cao Ying,
Zhang XC
Publication year - 2010
Publication title -
earth surface processes and landforms
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.294
H-Index - 127
eISSN - 1096-9837
pISSN - 0197-9337
DOI - 10.1002/esp.2019
Subject(s) - froude number , flume , sediment , stream power , shear stress , geology , hydraulics , turbulence , flow (mathematics) , hydrology (agriculture) , geotechnical engineering , flow velocity , erosion , soil science , geomorphology , mechanics , engineering , physics , aerospace engineering
Abstract Eroded sediment may have significant effects on the hydraulics of overland flow, but few studies have been performed to quantify these effects on steep slopes. This study investigated the potential effects of sediment load on Reynolds number, Froude number, flow depth, mean velocity, Darcy–Weisbach friction coefficient, shear stress, stream power, and unit stream power of overland flow in a sand‐glued hydraulic flume under a wide range of hydraulic conditions and sediment loads. Slope gradients were varied from 8·7 to 34·2%, unit flow rates from 0·66 to 5·26×10 −3 m 2 s −1 , and sediment loads from 0 to 6·95 kg m −1 s −1 . Both Reynolds number ( Re ) and Froude number ( Fr ) decreased as sediment load increased, implying a decrease in flow turbulence. This inverse relationship should be considered in modeling soil erosion processes. Flow depth increased as sediment load increased with a mean value of 1·227 mm, caused by an increase in volume of sediment‐laden flow (contribution 62·4%) and a decrease in mean flow velocity (contribution 37·6%). The mean flow velocity decreased by up to 0·071 m s −1 as sediment load increased. The Darcy–Weisbach friction coefficient ( f ) increased with sediment load, showing that the total energy consumption increased with sediment load. The effects of sediment load on f depended on flow discharge: as flow discharge increased, the influence of sediment load on f decreased due to increased flow depth and reduced relative roughness. Flow shear stress and stream power increased with sediment load, on average, by 80·5% and 60·2%, respectively; however, unit stream power decreased by an average of 11·1% as sediment load increased. Further studies are needed to extend and apply the insights obtained under these controlled conditions to real‐world overland flow conditions. Copyright © 2010 John Wiley & Sons, Ltd.