Open AccessExperimental and numerical studies on hydraulic fracturing characteristics with different injection flow rates in granite geothermal reservoir
Author(s) -
Cheng Yuxiang,
Zhang Yanjun,
Yu Ziwang,
Hu Zhongjun,
Ma Yueqiang,
Yang Yunxing
Publication year - 2021
Publication title -
energy science and engineering
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.638
H-Index - 29
ISSN - 2050-0505
DOI - 10.1002/ese3.816
Subject(s) - hydraulic fracturing , geothermal gradient , petroleum engineering , geothermal energy , injection well , water injection (oil production) , geology , permeability (electromagnetism) , well stimulation , fracture (geology) , geotechnical engineering , fluid dynamics , renewable energy , volumetric flow rate , flow (mathematics) , mechanics , reservoir engineering , engineering , geophysics , petroleum , paleontology , physics , membrane , biology , electrical engineering , genetics
Abstract Geothermal energy has been widely proposed as a potential renewable energy to replace traditional fossil fuel energy. Hot dry rock (HDR) reservoirs were the main geothermal energy resources and usually consist of low‐permeability hard granite without fluid. Developing HDR requires water cyclically flowing between injection and production wells to extract heat energy. Hydraulic fracturing, as a key reservoir stimulation technology, can create the path of fluid cyclically flowing. However, few studies have investigated hydraulic induced artificial fractures in HDR geothermal formations. This paper investigated HDR geothermal reservoir stimulation characteristics and fracture patterns under different injection flow rates. Numerical simulations were conducted to model the laboratory tests. Results showed they were in good agreement, and this indicated the possibility of numerical simulation to predict hydraulic fracturing behavior under different injection flow rates. With the increase of injection flow rate, the fracture initiation pressures and breakdown pressures increased, and the propagation times and postfracturing pressures decreased. The fracture geometries were observed and analyzed, mean injection power was proposed, and results showed that it could be used to roughly estimate the fracture total lengths. Moreover, the fracture permeabilities based on the pressure data were calculated. These results can provide some reasonable advice for implementing reservoir stimulations on application to field‐scale HDR operation.