Open AccessField and simulation study of the rational coal pillar width in extra‐thick coal seams
Author(s) -
He Wenrui,
He Fulian,
Zhao Yongqiang
Publication year - 2020
Publication title -
energy science and engineering
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.638
H-Index - 29
ISSN - 2050-0505
DOI - 10.1002/ese3.538
Subject(s) - coal , coal mining , abutment , mining engineering , geology , deformation (meteorology) , geotechnical engineering , engineering , structural engineering , oceanography , waste management
Abstract The principles of mining pressure in extra‐thick coal seams are different from those of medium‐thick and thick coal seams. Field investigation, laboratory test, and simulation analysis methods were used to study the correlation between the gob‐side entry (GSE) stability and coal pillar width during longwall top coal caving mining in extra‐thick coal seams. The test site is in Datong City, Shanxi Province, China. The mining pressure in N5209 tailgate with coal pillar of 30 m is severe based on the field investigations during the N5209 panel retreat. Global constitutive double‐yield and strain‐softening models were built to study the abutment pressures and plastic failure ranges of coal seams with different thicknesses and coal pillar widths. The simulation results show that the GSE with an 8‐m coal pillar is destressed and minimal GSE deformation occurs. In addition, the abutment stress in the coal pillar decreases with increasing coal seam thickness. The field tests indicate that the GSE with an 8‐m‐wide coal pillar is stable in extra‐thick coal seams. This study provides a reference for the coal pillar design in coal mines with similar geological and mining conditions.