Premium
Encapsulated phase change materials for thermal energy storage: Experiments and simulation
Author(s) -
Hawlader M. N. A.,
Uddin M. S.,
Zhu H. J.
Publication year - 2002
Publication title -
international journal of energy research
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.808
H-Index - 95
eISSN - 1099-114X
pISSN - 0363-907X
DOI - 10.1002/er.773
Subject(s) - materials science , thermal energy storage , paraffin wax , phase change material , coating , coacervate , phase change , composite material , energy storage , liquid paraffin , chemical engineering , thermodynamics , wax , power (physics) , physics , engineering
In the present study, encapsulated phase change materials (PCMs) were used for the storage of thermal energy. Both experiments and simulation were performed to evaluate the characteristics of encapsulated PCMs. Tests were conducted in a packed bed to determine the performance of the encapsulated PCM. In the preparation of encapsulated PCMs, the coacervation technique was used. The performance of the encapsulated PCM was evaluated in terms of encapsulation ratio, hydrophilicity, and energy storage capacity. The experiments were designed, based on surface response method, to optimize the processing conditions. It was found that a higher coating to paraffin ratio led to a higher paraffin encapsulation ratio. The hydrophilicity value of encapsulated paraffin depended mainly on the ratio of paraffin to coating. The higher the ratio, the lower was its product hydrophilicity. When the paraffin to coating ratio was constant, the higher concentration of HCHO led to a lower hydrophilicity of the product. The encapsulated paraffin has shown large energy storage and release capacity (20–90 J g −1 ) during its phase changes depending on different ratios of paraffin to coating. Thermal cyclic test showed that encapsulated paraffin kept its geometrical profile and energy storage capacity even after 1000 cycles of operation. In the experiments and simulation of fluid heating process in encapsulated PCM charged packed bed, results showed that Eulerian granular multiphase model in FLUENT 4.47 is suitable for simulation of such a system. Copyright © 2002 John Wiley & Sons, Ltd.