Premium
Multifracture response to supercritical CO 2 ‐EGS and water‐EGS based on thermo‐hydro‐mechanical coupling method
Author(s) -
Bongole Kelvin,
Sun Zhixue,
Yao Jun,
Mehmood Asif,
Yueying Wang,
Mboje James,
Xin Ying
Publication year - 2019
Publication title -
international journal of energy research
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.808
H-Index - 95
eISSN - 1099-114X
pISSN - 0363-907X
DOI - 10.1002/er.4743
Subject(s) - hydraulic fracturing , geothermal gradient , supercritical fluid , poromechanics , permeability (electromagnetism) , geology , geotechnical engineering , fracture (geology) , petroleum engineering , water flow , steam injection , pore water pressure , borehole , thermodynamics , chemistry , porosity , porous medium , geophysics , physics , biochemistry , membrane
Summary Hydraulic‐fracturing treatments have become an essential technology for the development of deep hot dry rocks (HDRs). The deep rock formation often contains natural fractures (NFs) at micro and macroscales. In the presence of the NF, the hydraulic‐fracturing process may form a complex fracture network caused by the interaction between hydraulic fractures and NF. In this study, analysis of carbon dioxide (CO 2 )‐based enhanced geothermal system (EGS) and water‐based EGS in complex fracture network was performed based on the thermo‐hydro‐mechanical (THM) coupling method, with various rock constitutive models. The complexity of the fracture geometry influences the fluid flow path and heat transfer efficiency of the thermal reservoir. Compared with CO 2 ‐based EGS, water‐based EGS had an earlier thermal breakthrough with a rapid decline in production temperature. CO 2 can easily gain heat rising its temperature thus reducing the effect of a premature thermal breakthrough. Both CO 2 ‐based EGS and water‐based EGS are affected by in‐situ stress; the increase in stress ratio improved the fracture permeability but resulted in an early cold thermal breakthrough. When the same injection rate is applied to water‐based EGS and CO 2 ‐based EGS, water‐based EGS displayed higher injection pressure buildup. Water‐based EGS had higher reservoir deformation area than CO 2 ‐based EGS, and thermoelastic constitutive model for water‐based EGS showed larger deformed area ratio than thermo‐poroelastic rock model. Furthermore, higher values of rock modulus accelerated the reservoir deformation for water‐based EGS. This study established a novel discussion investigating the performance of CO 2 ‐based EGS and water‐based EGS in a complex fractured reservoir. The findings from this study will help in deepening the understanding of the mechanisms involved when using CO 2 or water as a working fluid in EGS.