Premium
Design and energy evaluation of a stand‐alone copper‐chlorine (Cu‐Cl) thermochemical cycle system for trigeneration of electricity, hydrogen, and oxygen
Author(s) -
Wu Wei,
Hsu Fu Teng,
Chen Han Yu
Publication year - 2018
Publication title -
international journal of energy research
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.808
H-Index - 95
eISSN - 1099-114X
pISSN - 0363-907X
DOI - 10.1002/er.3894
Subject(s) - electricity generation , hydrogen production , flue gas , waste management , chemistry , thermochemical cycle , combined cycle , process engineering , waste heat , heat exchanger , environmental science , hydrogen , thermodynamics , engineering , mechanical engineering , power (physics) , physics , organic chemistry , turbine
Summary In this article, a new stand‐alone Cu‐Cl cycle system (SACuCl) for trigeneration of electricity, hydrogen, and oxygen using a combination of a specific combined heat and power (CHP) unit and a 2‐step Cu‐Cl cycle using a CuCl/HCl electrolyzer is presented. Based on the self‐heat recuperation technology for the CHP unit and the heat integration of the Cu‐Cl cycle unit, the power efficiency of the SACuCl for 5 prescribed scenarios (case studies) is predicted to achieve about 48% at least. The SACuCl uses the technologies of the dry reforming of methane and the oxy‐fuel combustion to achieve a relatively high CO 2 concentration in the flue gas, and CO 2 emissions for power generation could be almost restricted by 0.418 kg/kWh. From the aspect of the electricity required for hydrogen production, it is verified that the 2‐step Cu‐Cl cycle system is superior to the conventional water electrolyzer because the CHP process supplies the heat/electricity for Cu‐Cl thermochemical reactions and a thermoelectric generator is connected to the exhaust gas for recovering the power consumption from the compressor and the CuCl/HCl electrolyzer. Finally, the heat exchanger network and the pinch technology are employed to determine the optimum heat recovery of the Cu‐Cl cycle. In case 5 analyzed for the SACuCl, the electricity required for the heat‐integrated 2‐step Cu‐Cl cycle is predicted to dramatically decrease from 4.39 to 0.452 kWh/m 3 H 2 and the cycle energy efficiency could be obviously increased from 23.77 to 31.97%.