Premium
Novel insights on the impact of top water on Steam‐Assisted Gravity Drainage in a point bar reservoir
Author(s) -
AustinAdigio Maureen E.,
Wang Jingyi,
Alvarez Jose M.,
Gates Ian D.
Publication year - 2018
Publication title -
international journal of energy research
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.808
H-Index - 95
eISSN - 1099-114X
pISSN - 0363-907X
DOI - 10.1002/er.3844
Subject(s) - steam assisted gravity drainage , bar (unit) , petroleum engineering , point bar , drainage , environmental science , engineering , geology , materials science , oceanography , geomorphology , ecology , asphalt , structural basin , oil sands , fluvial , composite material , biology
Summary As efforts are made to efficiently exploit and recover bitumen resources in Canada, increasingly more complex reservoirs in the Athabasca area continue to challenge the application of Steam‐Assisted Gravity Drainage (SAGD) technology. Several studies have been done to investigate the impact of heterogeneities/complexities such as shale barriers, lean zones, and top and bottom water on the performance of the SAGD process. However, the literature is deficient for point bar deposits with top water zones, a common occurrence in oil sands systems. This study, by using thermal reservoir simulation, examines SAGD performance in a point bar deposit reservoir where an overlying top water and an inclined heterolithic strata (IHS) is present. The results show that where the top water is unconfined and steam injection pressure is higher than that of the top water zone, there is a loss of thermal energy, but the top water does not impact steam chamber development. At steam injection pressure lower than that of the top water zone, top water continuously drains into the reservoir and constrains the size of the chamber. However, the IHS zone helps to delay drainage of the top water into the chamber when steam is injected at underbalanced conditions. Finally, under proper steam injection pressure conditions, top water production can be considerably delayed.