Premium
Wall building stiffness and strength effect on content sliding in Wellington seismic conditions
Author(s) -
Yeow Trevor Z.,
MacRae Gregory A.,
Dhakal Rajesh P.
Publication year - 2017
Publication title -
earthquake engineering and structural dynamics
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 2.218
H-Index - 127
eISSN - 1096-9845
pISSN - 0098-8847
DOI - 10.1002/eqe.2843
Subject(s) - stiffness , structural engineering , geotechnical engineering , engineering , geology
Summary A numerical study of unobstructed content sliding within several low‐to‐midrise reinforced concrete cantilever wall buildings designed to Wellington conditions in New Zealand is performed to validate the belief that increasing a building's strength and/or stiffness would result in more severe sliding response. It was shown that contents within stronger buildings experienced larger sliding response. If the building was designed to be strong, the sliding response of contents with a friction coefficient of 0.1 was smaller in stiffer buildings compared with those in flexible buildings. However, the trends start reversing with an increase in friction coefficient or a decrease in building strength. Overall, content sliding is not necessarily more severe in stiffer buildings, and in many cases, the opposite is true. This study's findings were compared against an existing parametric equation for estimating the maximum sliding displacement. This equation, which was originally derived for contents located within elastic frame buildings, was found to be more efficient than considering total floor accelerations alone but was underconservative by a mean of 17% for yielding multistorey buildings. A design procedure considering content sliding using the parametric equation and an example are provided. Copyright © 2016 John Wiley & Sons, Ltd.