z-logo
Premium
Solvent degradation studies using hydrodynamic cavitation
Author(s) -
Suryawanshi Pravin G.,
Bhandari Vinay M.,
Sorokhaibam Laxmi Gayatri,
Ruparelia Jayesh P.,
Ranade Vivek V.
Publication year - 2018
Publication title -
environmental progress and sustainable energy
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.495
H-Index - 66
eISSN - 1944-7450
pISSN - 1944-7442
DOI - 10.1002/ep.12674
Subject(s) - cavitation , solvent , toluene , degradation (telecommunications) , body orifice , acetone , yield (engineering) , chemistry , chemical engineering , ketone , materials science , organic chemistry , composite material , thermodynamics , mechanical engineering , telecommunications , physics , engineering , computer science
Hydrodynamic cavitation for the degradation of organic solvents was investigated in detail using a newer form of cavitating device‐vortex diode. The results were also compared with that using conventional cavitating device orifice. Removal of three different organic solvents—acetone, methyl ethyl ketone (MEK), and toluene were studied on a pilot plant with capacity of 1 m 3 /h. The effect of different operating parameters such as inlet pressure, initial concentration, and reactor type on the degradation rate of solvent was investigated in detail. The results revealed that efficiency of solvent removal varies substantially with the change in physical operating conditions and nature of the solvent. It was found that up to 80% degradation could be achieved for toluene (cavitational yield 32.2 × 10 −3  mg/J), substantially higher than that for acetone and MEK indicating the effect of molecular weight/structure in the degradation process. Further, the results clearly indicated chemical oxidation as a predominant mechanism for degradation and not physical destruction. Vortex diode that works on the principle of vortex generation for cavitation, was found to be far superior over conventional cavitating device‐orifice‐ ∼up to eight times higher cavitational yield could be obtained for toluene as compared to orifice. The results of this study provide newer insight into solvent removal using hydrodynamic cavitation and would have bearing on the treatment of solvent containing wastewaters. © 2017 American Institute of Chemical Engineers Environ Prog, 37: 295–304, 2018

This content is not available in your region!

Continue researching here.

Having issues? You can contact us here