z-logo
Premium
Hydration characteristics of recycling reduction slag and waste sludge by co‐sintered treatment produced as eco‐cement
Author(s) -
Lin KaeLong,
Lo KangWei,
Hung MingJui,
Hwang ChaoLung,
Cheng TaWui,
Chang YuMin,
Huynh TrongPhuoc
Publication year - 2017
Publication title -
environmental progress and sustainable energy
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.495
H-Index - 66
eISSN - 1944-7450
pISSN - 1944-7442
DOI - 10.1002/ep.12618
Subject(s) - compressive strength , cement , waste management , raw material , portland cement , sewage sludge , materials science , slag (welding) , curing (chemistry) , metallurgy , environmental science , sewage treatment , composite material , chemistry , engineering , organic chemistry
Waste materials have traditionally been discarded in landfills and often dumped directly into ecosystems without adequate treatment. However, possible reuse and recycling alternatives should be investigated and implemented. Recent environmentally friendly approaches have been aimed at achieving sustainable development by conserving natural resources and minimizing the discarding of materials. The objective of the present study was to investigate the hydration characteristics of reduction slag, limestone sludge, stone sludge, and iron‐oxide sludge for fabricating four types of eco‐cement clinkers. The compound raw materials were burned for 2 h at 1400°C to form eco‐cement clinkers. The results showed that the major components of ordinary Portland cement (OPC), namely C 3 S, C 2 S, C 3 A, and C 4 AF, were present in the eco‐cement clinkers. The compressive strength development of EcoA pastes (containing 78% limestone sludge, 19.51% stone sludge, and 2.49% iron‐oxide sludge) was similar to that of the commercial OPC products. The compressive strength of the EcoD pastes (containing 71% limestone sludge, 19.51% stone sludge, 2.49% iron‐oxide sludge, and 7% reduction slag) decreased as the amount of α‐C 2 S increased. Mercury intrusion porosimetry indicated that the pore volume of the pastes gradually decreased with an increase in the curing time. Furthermore, the results of physical‐mechanical tests showed that reduction slag, limestone sludge, stone sludge, and iron‐oxide sludge can be used as raw materials in cement production at no cost to the producer, thereby reducing the production costs. © 2017 American Institute of Chemical Engineers Environ Prog, 36: 1466–1473, 2017

This content is not available in your region!

Continue researching here.

Having issues? You can contact us here