Premium
Thin‐film‐transistor liquid‐crystal display waste glass and nano‐SiO 2 as substitute sources for metakaolin‐based geopolymer
Author(s) -
Gao Kang,
Lin KaeLong,
Wang DeYing,
Shiu HauShing,
Hwang ChaoLung,
Tuan Bui Le Anh,
Cheng TaWui
Publication year - 2014
Publication title -
environmental progress and sustainable energy
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.495
H-Index - 66
eISSN - 1944-7450
pISSN - 1944-7442
DOI - 10.1002/ep.11868
Subject(s) - metakaolin , materials science , geopolymer , thin film transistor , flexural strength , liquid crystal display , composite material , melt spinning , compressive strength , optoelectronics , spinning , layer (electronics)
Thin‐film‐transistor liquid‐crystal display (TFT‐LCD) waste glass can be used as a raw material in the production of geopolymer because of its amorphous and also contains relatively large amounts of silicon and aluminum. The effects of nano‐SiO 2 (NS) addition levels (0%–3%) with 1% increments and the geopolymer replacement levels of TFT‐LCD waste glass (0%–40%) with 10% increments were analyzed quantitatively. The optimal geopolymer proportion was identified based on its mechanical characteristics and flexural strength. The geopolymer samples were also analyzed for changes in weight, and a thermogravimetric analyzer and 29 Si magic‐angle spinning nuclear magnetic resonance to measure the short‐range network ordering. The results of this study indicated that the TFT‐LCD waste glass metakaolin (TWGM) geopolymer sample with 10% TFT‐LCD waste glass and 1% NS exhibited greater strength and lower porosity than other samples. Understanding these characteristics is necessary to identify the mechanical strength, thermal stability, and the fundamental structure of a geopolymer system. Applying NS to a geopolymer enhances its compactness, improves its uniformity, and increases its strength. These results show that 10% TFT‐LCD waste glass and 1% NS can be used as a partial substitute for metakaolin (MK) in geopolymer materials. © 2013 American Institute of Chemical Engineers Environ Prog, 33: 947–955, 2014