Premium
Renewable Ceramic (TiN) Ring Electrode in Stripping Voltammetry. Determination of Pb(II) Without Removal of Oxygen
Author(s) -
Baś B.,
Piech R.,
Ziemnicka M.,
Reczyński W.,
Robótka M.
Publication year - 2009
Publication title -
electroanalysis
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.574
H-Index - 128
eISSN - 1521-4109
pISSN - 1040-0397
DOI - 10.1002/elan.200804598
Subject(s) - electrode , voltammetry , reference electrode , tin , materials science , electrolyte , stripping (fiber) , analytical chemistry (journal) , electrochemistry , cyclic voltammetry , supporting electrolyte , detection limit , chemistry , inorganic chemistry , chromatography , metallurgy , composite material
Characteristic features of the process of Pb(II) reduction and oxidation at a renewable ceramic ring electrode (RCRE) were studied by stripping voltammetry. The main constituents of the RCRE are: a specially constructed TiN ring electrode, a silver sheet used as silver counter/quasi‐reference electrode and a silicon O‐ring are fastened together in a polypropylene body. The renovation of this electrode is carried out through mechanical removal of solid contaminants and electrochemical activation in the electrolyte which fills the RCRE body. The optimal measurement conditions, composition of supporting electrolyte and procedures of the electrode activation were selected. The measurements were carried out from nondeaerated solutions. As shown on selected examples, RCRE exhibits good performance in underpotential deposition stripping voltammetry (UPD‐SV) applied for the determination of lead(II) in synthetic solutions with and without surfactants and in certified reference materials. The peak current is proportional to the concentration of lead(II) over the range 2×10 −9 –1×10 −7 mol L −1 , with a 3 σ detection limit of 1×10 −9 mol L −1 with an accumulation time of 30 s. The obtained results showed good reproducibility, ( RSD =2–5%; n =5) and reliability.