Development of gate drive circuit for next‐generation ultrahigh‐speed switching devices

This paper describes a gate drive circuit which is capable of driving an ultrahigh‐speed switching device and of suppressing high‐frequency noise caused by its high dV / dt ratio of 104 V/μs order. SiC (silicon carbide)‐based power semiconductor devices are very promising as next‐generation ultrahigh‐speed switching devices. However, one of their application problems is how to drive them with less high‐frequency noise without sacrificing their ultrahigh‐speed operation capability. The paper proposes a new gate drive circuit specialized for such devices, which charges and discharges the input capacitance of the device by using an impulse voltage generated by inductors. This ultrahigh‐speed switching operation causes a high‐frequency common‐mode noise current in the gate drive circuit, which penetrates an isolated power‐supply transformer due to the parasitic capacitance between the primary and the secondary windings. In order to overcome this secondary problem, a toroidal multicore transformer is also proposed in the paper in order to reduce the parasitic capacitance drastically. By applying the former technique, the turn‐on time and turn‐off time of the power device were shortened by 50% and by 20%, compared with a conventional push‐pull gate drive circuit, respectively. In addition, the latter technique allows reduction of the peak common‐mode noise current to 25%, compared with the use of a conventional standard utility power‐supply transformer. © 2011 Wiley Periodicals, Inc. Electr Eng Jpn, 176(4): 52–60, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21124