Premium
Influence of ambient pressure on the performance of an arc discharge plasma actuator
Author(s) -
Gan Tian,
Jin Di,
Guo Shangguang,
Wu Yun,
Li Yinghong
Publication year - 2018
Publication title -
contributions to plasma physics
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.531
H-Index - 47
eISSN - 1521-3986
pISSN - 0863-1042
DOI - 10.1002/ctpp.201700133
Subject(s) - schlieren , materials science , shock (circulatory) , shock wave , plasma actuator , ambient pressure , plasma , arc (geometry) , electric arc , mechanics , electrode , meteorology , dielectric barrier discharge , chemistry , physics , optoelectronics , medicine , geometry , mathematics , quantum mechanics , dielectric
The arc discharge plasma actuator ( ADPA ) has wide application prospects in high‐speed flow control because of its local heating effect and strong disturbance. In this paper, the influence of ambient pressure, which ranges from 3 to 20 kPa , on the performance of a two‐electrode ADPA is investigated by a schlieren system. The duration of the arc heated region, as well as its area, is extracted by image processing. As the ambient pressure increases, different flow field evolutions occur. The duration of the ADPA heated region increases with the ambient pressure. The maximum duration reaches 1185.3 µs at 20 kPa . The velocity of the discharge‐induced blast shock wave first decreases gradually and then remains at 345 m/s for all air pressures. The blast shock wave has a higher velocity at lower pressures when it is freshly produced. A maximum blast shock wave velocity of 582 m/s is observed at the pressure of 7 kPa . The arc heated region is not sensitive to ambient pressure, but the deposited energy from the arc increases when the pressure increases.