Premium
Second‐order intermodulation cancelation and conversion‐gain enhancement techniques for CMOS active mixers
Author(s) -
Asghari Meysam,
Yavari Mohammad
Publication year - 2015
Publication title -
international journal of circuit theory and applications
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.364
H-Index - 52
eISSN - 1097-007X
pISSN - 0098-9886
DOI - 10.1002/cta.2022
Subject(s) - transconductance , flicker noise , intermodulation , cmos , capacitor , noise figure , electrical engineering , transistor , electronic engineering , capacitance , noise (video) , harmonic mixer , parasitic capacitance , engineering , physics , radio frequency , computer science , voltage , electrode , amplifier , local oscillator , quantum mechanics , artificial intelligence , image (mathematics)
Summary In this paper, two new techniques are proposed to improve the second‐order input intercept point (IIP2) and conversion‐gain in double‐balanced Gilbert‐cell complementary metal‐oxide semiconductor (CMOS) mixers. The proposed IIP2 improvement technique is based on canceling the common‐mode second‐order intermodulation (IM2) component at the output current of the transconductance stage. Additionally, the conversion‐gain is improved by increasing the fundamental component of the transconductance stage output current and creating a negative capacitance to cancel the parasitic capacitors. Moreover, in the proposed IM2 cancelation technique, by decreasing the bias current of the switching transistors, the flicker noise of the mixer is reduced. The proposed mixer has been designed with input frequency and output bandwidth equal to 2.4 GHz and 20 MHz, respectively. Spectre‐RF simulation results show that the proposed techniques simultaneously improve IIP2 and conversion‐gain by approximately 23.2 and 5.7 dB, respectively, in comparison with the conventional mixer with the same power consumption. Also, the noise figure (NF) at 20 kHz, where the flicker noise is dominant, is reduced by 4.9 dB. The average NF is increased nearly 0.9 dB, and the value of third‐order input intercept point (IIP3) is decreased approximately 1.8 dB. Copyright © 2014 John Wiley & Sons, Ltd.