Open AccessCoupled actuators with a mechanically synchronized phase during MR elastography: A phantom feasibility study
Author(s) -
Neumann Wiebke,
Lehnart Vanessa R.,
Vetter Yannik,
Bichert Andreas,
Schad Lothar R.,
Zöllner Frank G.
Publication year - 2018
Publication title -
concepts in magnetic resonance part b: magnetic resonance engineering
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.286
H-Index - 32
eISSN - 1552-504X
pISSN - 1552-5031
DOI - 10.1002/cmr.b.21403
Subject(s) - imaging phantom , actuator , acoustics , attenuation , shear waves , magnetic resonance elastography , elastography , stiffness , vibration , materials science , shear (geology) , biomedical engineering , physics , optics , computer science , ultrasound , engineering , artificial intelligence , composite material
Magnetic resonance elastography (MRE) is an MR imaging method for the quantification of spatial stiffness of soft tissues using mechanically induced dynamic shear waves. In some applications, the penetration of shear waves can be limited through attenuation and shadowing of the waves. In order to increase the actuator performance, we present a dual driver approach to compensate for shear wave attenuation and to achieve better coverage over the entire region of interest. Materials and Methods (a) We designed pneumatic turbines that created a sinusoidal centrifugal force due to an eccentric weight. Two turbines were connected in‐phase with each eccentric weight having the same angular position relative to its pivot point. (b) We developed a tissue elasticity mimicking abdominal phantom. (c) The phantom served as a test object to investigate the feasibility to generate shear waves at two surface origins with the dual actuator system and to compare it against a single actuation setup. Results and Discussion A stable phase relationship of the shear waves generated by the turbines was achieved as the positions of the eccentric weights were mechanically fixed. The abdominal phantom yielded sufficient MR signal. Liver and rib cage were clearly visible in MR imaging. The shear waves generated by the dual turbine propagated through the region of interest. Our turbine design is reproducible through 3D printing and can be integrated into existing clinical equipment for 1.5 T and 3 T scanners.