Premium
Removal of Recalcitrant Organic Compounds From an Industrial Complex Effluent by Heterogeneous Fenton‐Type Treatment
Author(s) -
Covinich Laura,
Felissia Fernando,
Fenoglio Rosa,
Area María C.
Publication year - 2017
Publication title -
clean – soil, air, water
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.444
H-Index - 66
eISSN - 1863-0669
pISSN - 1863-0650
DOI - 10.1002/clen.201500451
Subject(s) - catalysis , hydrogen peroxide , chemistry , effluent , chemical oxygen demand , oxide , wastewater , factorial experiment , organic chemistry , waste management , statistics , mathematics , engineering
Because of their chemical complexity, industrial chemi‐mechanical pulping effluents are evaporated and burned, in spite of the high associated cost involved in these processes. The aim of this study was to remove recalcitrant compounds from this kind of wastewater using a Fenton‐type treatment. The main parameters involved in the process and their influence on the results were determined. Homemade catalysts based on CuO, Fe 2 O 3 , NiO, and ZnO, supported on γ‐Al 2 O 3 have been tested for catalytic oxidation, and the CuO/γ‐Al 2 O 3 catalysts showed the greatest effect on total organic carbon (TOC) reduction (52.7%). A series of two‐level factorial experiments was subsequently applied to evaluate the most favorable range of conditions for CuO/γ‐Al 2 O 3 application. The studied variables were hydrogen peroxide concentration ([H 2 O 2 ], g/L), active phase content (metal oxide supported on alumina,%), mass of catalyst (metal oxide/alumina system, g), and reaction temperature (°C). The highest reduction of all parameters was obtained at the superior level of all variables with CuO/γ‐Al 2 O 3 , achieving reductions of chemical oxygen demand (COD) and TOC between 40 and 50%. Increasing catalyst mass did not produce additional benefit. This variable has a significant effect only on the reduction of aromatic compounds. At its low level, reduction in aromatic content exceeded 80%. Color reduction was influenced only by temperature (maximum reduction of 90%).