Premium
A simplified model of nitric oxide emission from a circulating fluidized bed combustor
Author(s) -
Talukdar J.,
Basu P.
Publication year - 1995
Publication title -
the canadian journal of chemical engineering
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.404
H-Index - 67
eISSN - 1939-019X
pISSN - 0008-4034
DOI - 10.1002/cjce.5450730506
Subject(s) - coal , combustor , fluidized bed combustion , environmental science , nuclear engineering , nox , waste management , metallurgy , combustion , chemistry , materials science , engineering , organic chemistry
A simplified mathematical model leading to a closed form of solution is developed for estimation of nitric oxide emission from a coal fired circulating fluidized bed (CFB) furnace. The furnace is divided into two sections: a lower section below and an upper section above the secondary air injection level. Reactions in the cyclone and the return leg are neglected. Furnace dimensions, coal feed rate, coal composition and furnace temperature are inputs to the model which was validated against several pilot scale and commercial units. Experimental results from two pilot plants and two commercial power plants agree with model predictions. A sensitivity analysis was carried out using the model to examine the effect of different operating parameters and coal properties on the overall NO emission from the furnace. It was found that excess air and furnace temperature are most important factors influencing the NO emission level. The primary to secondary air ratio influences the NO emission level reasonably. Properties of coal are other factors which affect the NO emission to a large extent. The model, though it invovles some simplification, predicts the overall emission of NO with a level of accuracy accepted in commercial operation.