z-logo
Premium
Simultaneous Absorption of Hydrogen Sulfide and Carbon Dioxide into di ‐isopropanolamine Solution
Author(s) -
Yih SiuMing,
Sun ChiChun
Publication year - 1987
Publication title -
the canadian journal of chemical engineering
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.404
H-Index - 67
eISSN - 1939-019X
pISSN - 0008-4034
DOI - 10.1002/cjce.5450650411
Subject(s) - absorption (acoustics) , hydrogen sulfide , volumetric flow rate , analytical chemistry (journal) , chemistry , carbon dioxide , mass transfer , mass transfer coefficient , chromatography , materials science , thermodynamics , organic chemistry , sulfur , physics , composite material
The simultaneous absorption of hydrogen sulfide and carbon dioxide into di ‐isopropanolamine (DIPA) solution was investigated in a 183 cm long, 2.72 cm OD wetted‐wall column at atmospheric pressure. The influence of liquid flow rate, gas flow rate, temperature and liquid concentration on the absorption rate, overall gas‐phase mass transfer coefficient and selectivity factor were studied at a constant gas feed ratio. The results show that the absorption rate of CO 2 increases rapidly with increasing liquid flow rate (the Reynolds number of the turbulent liquid film ranges from 2600 to 4350) but increases moderately with increasing gas flow rate ( G = 18‐91 L/min), indicating that it is liquid‐phase mass transfer controlled. In contrast, the absorption rate of H 2 S increases very slowly with increasing liquid flow rate but increases rapidly with increasing gas flow rate, indicating that it is gas‐phase mass transfer controlled. The absorption rate of CO 2 also increases with increasing temperature (26‐80°C) but H 2 S absorption rate decreases with increasing temperature. When the concentration of DIPA solution increases from 0.2 to 2.6 mol/L, the absorption rate of both CO 2 and H 2 S increases but with a larger rate of increase for CO 2 For selective H 2 S removal, it is preferable to operate at low liquid and high gas flow rates, low temperatures and low DIPA concentrations.

This content is not available in your region!

Continue researching here.

Having issues? You can contact us here