Premium
Removal of elemental mercury by Ce and Co modified MCM‐41 catalyst from simulated flue gas
Author(s) -
Zhang Xiaopeng,
Tan Bojian,
Wang Jinxin,
Zhang Hang,
Li Chengfeng,
He Gaohong
Publication year - 2019
Publication title -
the canadian journal of chemical engineering
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.404
H-Index - 67
eISSN - 1939-019X
pISSN - 0008-4034
DOI - 10.1002/cjce.23255
Subject(s) - catalysis , flue gas , crystallinity , mcm 41 , dispersion (optics) , mesoporous material , chemical engineering , mass transfer , chemistry , materials science , bet theory , specific surface area , inorganic chemistry , organic chemistry , chromatography , composite material , physics , optics , engineering
Co and Ce based catalysts have been proven to possess a high Hg 0 removal efficiency. However, these catalysts have a low dispersion of active components and low mass transfer rate, which limits their catalytic activity. MCM‐41 has a large surface area and a highly ordered mesoporous structure, which can improve the dispersion of Co and Ce, resulting in a high mass transfer rate. In this paper, different amounts of Co and Ce were loaded on MCM‐41 to synthesize Co x ‐Ce x /MCM‐41. The characteristic results of the catalyst showed that catalysts with a lower Co and Ce loading amount had a high dispersion and a low crystallinity, leading to more activity sites on the catalyst surface. Hence, the Hg 0 removal efficiency of the catalysts first increased with the increase of the Co and Ce loading amount. However, with the further increase of the Co and Ce loading amount, the crystallinity of the catalysts increased, which might cause the blockage of the pores and the decrease of BET surface areas, leading to a low Hg 0 removal efficiency. Along with the factors mentioned above, Co 0.15 ‐Ce 0.15 /MCM‐41 had the best catalytic activity, which showed above 85 % Hg 0 removal efficiency in the temperature range of 200–300 °C at 180 000 h −1 . Flue gas components had different effects on catalytic activity. O 2 and NO could promote, but H 2 O and SO 2 inhibit the Hg 0 removal efficiency. The simulated flue gas of 300 ppm SO 2 , 400 ppm NO, 6 % H 2 O, and 5 % O 2 have serious effects on catalytic activity leading to a lower Hg 0 removal efficiency of 20 % for Co 0.15 ‐Ce 0.15 /MCM‐4.