z-logo
Premium
Transesterification of palm oil in a microtube reactor
Author(s) -
Kaewchada Amaraporn,
Pungchaicharn Siriluck,
Jaree Attasak
Publication year - 2016
Publication title -
the canadian journal of chemical engineering
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.404
H-Index - 67
eISSN - 1939-019X
pISSN - 0008-4034
DOI - 10.1002/cjce.22464
Subject(s) - transesterification , biodiesel , methanol , residence time (fluid dynamics) , catalysis , molar ratio , batch reactor , chemistry , chemical engineering , fatty acid methyl ester , nuclear chemistry , materials science , organic chemistry , geotechnical engineering , engineering
Transesterification of palm oil and methanol with KOH as a catalyst in biodiesel synthesis was studied in a microtube reactor. The first part is the investigation on the influences of catalyst amount (5–13 mg/g, 0.5–1.3 mass%), reaction temperature (52–70 °C), methanol‐to‐oil molar ratio (4.5:1–9:1), and residence time (5–20 s) on fatty acid methyl ester content (%FAME). The optimal %FAME of 97.14 % was achieved with the catalyst amount of 10 mg/g (1 mass%), operating at 60 °C, and using a methanol‐to‐oil molar ratio of 6:1 and a residence time of 5 s. High %FAME was obtained at low residence time due to the small size of droplets in the micro‐channel reactor. The second part deals with the effect of mixer and reactor geometry. A comparison between %FAME obtained from the synthesis in a batch stirred‐tank reactor and in a microtube suggested that the reaction proceeded much faster for the latter. The use of a T‐mixer provided superior reaction performance compared to the J‐mixer throughout the conditions studied.

This content is not available in your region!

Continue researching here.

Having issues? You can contact us here