z-logo
Premium
Coke yield and heat transfer in reaction of liquid–solid agglomerates of Athabasca vacuum residue
Author(s) -
Ali Mohamed,
Courtney Megan,
Boddez Lisa,
Gray Murray
Publication year - 2010
Publication title -
the canadian journal of chemical engineering
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.404
H-Index - 67
eISSN - 1939-019X
pISSN - 0008-4034
DOI - 10.1002/cjce.20242
Subject(s) - coke , agglomerate , yield (engineering) , residue (chemistry) , chemistry , materials science , alloy , metallurgy , chemical engineering , composite material , organic chemistry , engineering
The ultimate coke yield was determined for agglomerates of Athabasca vacuum residue and coke particles by heating on Curie‐point alloy strips in an induction furnace at 503 and 530°C until all toluene‐soluble material was converted. Coke yield results from agglomerates were compared to the coke yield results from reacting thin films of vacuum residue. The average coke yield from the agglomerates was 23%, while the coke yield from thin films of 20 µm thickness was 11%, which supports the role of mass transfer in coke formation reactions. The ultimate coke yield was insensitive to vacuum residue concentration, agglomerate size, and reaction temperature. The temperature profile within agglomerates was measured by implanting a thermocouple, and a simple heat transfer model was used to describe the temperature variation with time. The effective thermal diffusivity of the agglomerates was 0.20 × 10 −6  m 2 /s. Control experiments on reaction in thin liquid films confirmed that heating rates in the range of 14.8–148 K/s had no effect on the ultimate yield of coke yield.

This content is not available in your region!

Continue researching here.

Having issues? You can contact us here