Premium
Use of ultrasound in petroleum residue upgradation
Author(s) -
Sawarkar Ashish N.,
Pandit Aniruddha B.,
Samant Shriniwas D.,
Joshi Jyeshtharaj B.
Publication year - 2009
Publication title -
the canadian journal of chemical engineering
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.404
H-Index - 67
eISSN - 1939-019X
pISSN - 0008-4034
DOI - 10.1002/cjce.20169
Subject(s) - asphaltene , cavitation , cracking , asphalt , hydrocarbon , residue (chemistry) , ultrasonic sensor , chemistry , petroleum , ultrasound , boiling , chemical engineering , pulp and paper industry , materials science , petroleum engineering , organic chemistry , composite material , acoustics , geology , physics , engineering
Abstract Conventional processes for the upgradation of residual feedstocks, viz., thermal cracking and catalytic cracking are carried out in the temperature range of 400–520°C. Such high temperatures can in principle be substituted by acoustic cavitation. In the present work, two vacuum residues, namely, Arabian mix vacuum residue (AMVR) and Bombay high vacuum residue (BHVR) and one asphalt, viz., Haldia asphalt (HA) were subjected to acoustic cavitation for different reaction times from 15 min to 120 min at ambient temperature and pressure. An attempt has been made to seek a performance comparison of two devices of acoustic cavitation, namely, ultrasonic bath and ultrasonic horn with regard to their ability to upgrade the petroleum residues to lighter, more value‐added products mainly the hydrocarbons boiling in the range of gas oil fraction. Another attempt has been made to study the effect of ultrasound on the upgradation of the residue when it is emulsified in water with the help of different surfactants. For all the cases, a kinetic model has been developed based on the constituents of the residue so as to get an insight into the reaction mechanism. The study revealed that ultrasonic horn is more effective in bringing about the upgradation than ultrasonic bath and that the acoustic cavitation of the aqueous emulsified hydrocarbon mixture could reduce the asphaltenes content to a greater extent than the acoustic cavitation of non‐emulsified hydrocarbon mixture. The reduction in asphaltenes content of BHVR was found to be more followed by AMVR followed by HA. The variation in the rate constants was found to be feed specific and the rate constants for the conditions of maximum conversion of asphaltenes to gas oil for AMVR, BHVR and HA were found to be 0.29 × 10 −4 s −1 , 1.4 × 10 −4 s −1 and 0.23 × 10 −4 s −1 , respectively.