Premium
Die Bedeutung von Spalten zwischen Rohren und Rohrboden für das betriebliche Verhalten von Wärmeaustauschern
Author(s) -
Achten Norbert,
Herbsleb Günter,
Wieling Norbert
Publication year - 1986
Publication title -
chemie ingenieur technik
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.365
H-Index - 36
eISSN - 1522-2640
pISSN - 0009-286X
DOI - 10.1002/cite.330580907
Subject(s) - crevice corrosion , tube (container) , heat exchanger , corrosion , materials science , metallurgy , galvanic cell , galvanic corrosion , composite material , mechanical engineering , engineering
Importance of crevices formed between tubes and tube plate for the operational behaviour of heat exchangers . It must be guaranteed by construction and manufacture of heat exchangers that primary and secondary medium are completely separated from each other. When this requirement is fullfilled, the operational use of heat exchangers can be impaired by corrosion reactions within the crevice formed between tube and tube plate which may result in corrosion damage. The various techniques which are in use to connect tubes and tube plate and which are described in the present report, must be valued with respect to the tightness of the connection as well as to the formation of crevices between tubes and tube plate. Corrosion resistant copperbase alloys and stainless steels are the most important materials which are in use for the construction of heat exchangers. The mechanisms of crevice corrosion with unalloyed and low alloy carbon steels, stainless steels, and mixed connections between tube and tube plate with these materials are described in detail. Crevice corrosion may be caused also by the formation of galvanic cells between materials of differing electrochemical response. Furthermore, the concentration of aggressive media in crevices between tubes and tube plate can lead to corrosion damage of heat exchanger tubes. For the service operation of heat exchangers without any hazard of corrosion damage in crevices between tubes and tube plate, such crevices must be avoided by proper construction and manufacture. As a model for suitable measures to avoid crevices, the manufacture of steam generators for PWR's is described.