Premium
Synthesis and Photovoltaic Properties of Cyclopentadithiophene‐Based Low‐Bandgap Copolymers That Contain Electron‐Withdrawing Thiazole Derivatives
Author(s) -
Jung In Hwan,
Yu Jinyoung,
Jeong Eunjae,
Kim Jinseck,
Kwon Sooncheol,
Kong Hoyoul,
Lee Kwanghee,
Woo Han Young,
Shim HongKu
Publication year - 2010
Publication title -
chemistry – a european journal
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.687
H-Index - 242
eISSN - 1521-3765
pISSN - 0947-6539
DOI - 10.1002/chem.200903064
Subject(s) - band gap , thiazole , materials science , intramolecular force , copolymer , electron mobility , gel permeation chromatography , crystallography , polymer chemistry , stereochemistry , chemistry , polymer , optoelectronics , composite material
We have synthesized four types of cyclopentadithiophene (CDT)‐based low‐bandgap copolymers, poly[{4,4‐bis(2‐ethylhexyl)‐4 H‐ cyclopenta[2,1‐ b :3,4‐ b′ ]dithiophene‐2,6‐diyl}‐ alt ‐(2,2′‐bithiazole‐5,5′‐diyl)] ( PehCDT‐BT ), poly[(4,4‐dioctyl‐4 H ‐cyclopenta[2,1‐ b :3,4‐ b′ ]dithiophene‐2,6‐diyl)‐ alt ‐(2,2′‐bithiazole‐5,5′‐diyl)] ( PocCDT‐BT ), poly[{4,4‐bis(2‐ethylhexyl)‐4 H ‐cyclopenta[2,1‐ b :3,4‐ b′ ]dithiophene‐2,6‐diyl}‐ alt ‐{2,5‐di(thiophen‐2‐yl)thiazolo[5,4‐ d ]thiazole‐5,5′‐diyl}] ( PehCDT‐TZ ), and poly[(4,4‐dioctyl‐4 H ‐cyclopenta[2,1‐ b :3,4‐ b′ ]dithiophene‐2,6‐diyl)‐ alt ‐{2,5‐di(thiophen‐2‐yl)thiazolo[5,4‐ d ]thiazole‐5,5′‐diyl}] ( PocCDT‐TZ ), for use in photovoltaic applications. The intramolecular charge‐transfer interaction between the electron‐sufficient CDT unit and electron‐deficient bithiazole (BT) or thiazolothiazole (TZ) units in the polymeric backbone induced a low bandgap and broad absorption that covered 300 nm to 700–800 nm. The optical bandgap was measured to be around 1.9 eV for PehCDT‐BT and PocCDT‐BT , and around 1.8 eV for PehCDT‐TZ and PocCDT‐TZ . Gel permeation chromatography showed that number‐average molecular weights ranged from 8000 to 14 000 g mol −1 . Field‐effect mobility measurements showed hole mobility of 10 −6 –10 −4 cm 2 V −1 s −1 for the copolymers. The film morphology of the bulk heterojunction mixtures with [6,6]phenyl‐C 61 ‐butyric acid methyl ester (PCBM) was also examined by atomic force microscopy before and after heat treatment. When the polymers were blended with PCBM, PehCDT‐TZ exhibited the best performance with an open circuit voltage of 0.69 V, short‐circuit current of 7.14 mA cm −2 , and power conversion efficiency of 2.23 % under air mass (AM) 1.5 global (1.5 G) illumination conditions (100 mW cm −2 ).