Premium
Numerical simulation of ultra‐lightweight concrete encased cold‐formed steel structures
Author(s) -
Eid Nathalie,
Joó Attila László
Publication year - 2021
Publication title -
ce/papers
Language(s) - English
Resource type - Journals
ISSN - 2509-7075
DOI - 10.1002/cepa.1310
Subject(s) - structural engineering , parametric statistics , finite element method , buckling , stiffness , load bearing , nonlinear system , ultimate load , aggregate (composite) , engineering , materials science , composite material , mathematics , physics , statistics , quantum mechanics
Abstract The use of thin‐walled structures has been increasingly spread in the last few decades due to their big advantages in both structural design and construction methods. Therefore, the recent researches have discussed a wide range of thin‐walled structures applications. However, the resistance of such structures will be decreased by buckling effect; hence, different ways of strengthening methods have been investigated. One of this method is the use of lightweight concrete as a filling of thin‐walled members. Previous experimental research at the Department of Structural Engineering at Budapest University of Technology and Economics, was carried out to investigate the axial behavior of polystyrene aggregate concrete (PAC) braced CFS elements [1]. The effect of PAC has led to increase the load‐bearing capacity and to restrain the global and distortional buckling modes of steel elements. The results revealed that the ultimate load was increased by 37‐94%. A simplified nonlinear finite element model was developed in ANSYS software to be able to predict the peak resistance of PAC filled thin‐walled members. GMNI analyses were carried out to validate the numerical model by the experimental tests. The concrete was modelled by using springs with adequate stiffness, where a parametric study was conducted to determine the proper imperfection amplitudes of different element lengths. The numerical model showed good agreement with test results.