z-logo
Premium
Oxygen availability effect on the performance of air‐breathing cathode microbial fuel cell
Author(s) -
Mateo Sara,
Rodrigo Manuel,
Fonseca Luis Pina,
Cañizares Pablo,
FernandezMorales Francisco Jesus
Publication year - 2015
Publication title -
biotechnology progress
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.572
H-Index - 129
eISSN - 1520-6033
pISSN - 8756-7938
DOI - 10.1002/btpr.2106
Subject(s) - microbial fuel cell , oxygen , cathode , limiting current , anode , mole fraction , chemistry , faraday efficiency , limiting oxygen concentration , chemical engineering , analytical chemistry (journal) , electrode , environmental chemistry , electrochemistry , organic chemistry , engineering
The effect of the oxygen availability over the performance of an air‐breathing microbial fuel cell (MFC) was studied by limiting the oxygen supply to the cathode. It was found that anodic reaction was the limiting stage in the performance of the MFC while oxygen was fully available at cathode. As the cathode was depleted of oxygen, the current density becomes limited by oxygen transport to the electrode surface. The exerted current density was maintained when oxygen mole fraction was higher than 10% due to the very good performance of the cathodic catalysts. However, the current density drastically falls when working at lower concentrations because of mass transfer limitations. In this sense it must be highlighted that the maximum exerted power, when oxygen mole fraction was higher than 10%, was almost three times higher than that obtained when oxygen mole fraction was 5%. Regarding to the wastewater treatment, a significant decrease in the COD removal was obtained when the MFC performance was reduced due to the limited availability of oxygen, which indicates the significant role of the electrogenic microorganisms in the COD removal in MFC. In addition, the low availability of oxygen at the cathode leads to a lower presence of oxygen at the anode, resulting in an increase in the coulombic efficiency. © 2015 American Institute of Chemical Engineers Biotechnol. Prog ., 31:900–907, 2015

This content is not available in your region!

Continue researching here.

Having issues? You can contact us here