Premium
Farm‐scale production of fuel ethanol and wet grain from corn in a batch process
Author(s) -
Westby Carl A.,
Gibbons William R.
Publication year - 1982
Publication title -
biotechnology and bioengineering
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.136
H-Index - 189
eISSN - 1097-0290
pISSN - 0006-3592
DOI - 10.1002/bit.260240718
Subject(s) - stillage , fermentation , chemistry , ethanol fuel , food science , starch , ethanol , biofuel , ethanol fermentation , distillers grains , distillation , yield (engineering) , pulp and paper industry , chromatography , microbiology and biotechnology , biochemistry , materials science , engineering , biology , metallurgy
The batch production of fuel grade ethanol and distillers' wet grain (wet solids) in a farm‐scale process (1240–15,580 L/batch) is described. The employs yeast fermentation of amylase‐treated corn mash and a two‐stage distillation. Primary emphasis in this study was on the cooking, fermentation, and centrifugation steps. Without recycling, fermentation of the mash yield beers with 10.0–10.5% ethanol. Recycling of stillage supernatant at full, 75, or 50% strengths produced enriched mashes that after 48‐h fermentation yielded beers with 5–;14% more ethanol. Recycling twice with full‐strength supernatant at pH 7.0 increased the ethanol yield in the final beer 16.5%; however, the time to complete the final fermentation was extended form 48 to 72 h and salt buildup occurred. By recycling at pH 5.4, it was possible to avoid rapids salt buildup and obtain beers with 10.3–10.5% ethanol. Recycling resulted in increased levels of glucose, starch, crude protein, and fat in the beer and a reduced moisture content while the wet solids showed an increased starch content. Centrifugation after cooking or fermentation yield in the subsequently produced beer. Fermentation of a volume‐resorted mash supernatant gave a beer with only 9.25% ethanol. Mash wet solids varied somewhat chemically from beer and stillage solids. An economic and energy balance analysis of various modes of plant operation are provided and plant considerations are suggested.