Premium
Determining the flow regime in a biofilm carrier by means of magnetic resonance imaging
Author(s) -
Herrling Maria P.,
Guthausen Gisela,
Wagner Michael,
Lackner Susanne,
Horn Harald
Publication year - 2015
Publication title -
biotechnology and bioengineering
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.136
H-Index - 189
eISSN - 1097-0290
pISSN - 0006-3592
DOI - 10.1002/bit.25510
Subject(s) - biofilm , flow (mathematics) , flow velocity , flow conditions , materials science , chemistry , mechanics , geology , physics , bacteria , paleontology
ABSTRACT Biofilms on cylindrical carrier material originating from a lab‐scale moving bed biofilm reactor (MBBR) were investigated by means of Magnetic Resonance Imaging (MRI). The aim of this study was to determine the local flow velocities at the inner face of the biofilm carrier. To get an insight into the mass transport processes, flow velocity maps of blank and with biofilm cultivated carriers were measured. A single carrier was placed in a tube in three different orientations and exposed to flow velocities of 0.21, 0.42, and 0.64 mm/s. The interplay of the biofilm morphology and the local flow pattern was then analyzed including the effect of the orientation of the carrier in relation to the upstream flow angle. Within this study, the biofilm carrier can be understood as an interconnected system of four sections in which the incoming fluid volume will be distributed depending on the biomass occupation and morphology. In sections with high biofilm occupation, the flow resistance is increased. Depending on the orientation of the carrier in the flow field, this effect leads to flow evasion through less covered sections showing higher flow velocities and consequently the risk of biofilm detachment. However, there was no clear correlation between biofilm coverage and flow ratio. Biotechnol. Bioeng. 2015;112: 1023–1032. © 2014 Wiley Periodicals, Inc.