Premium
A lab‐on‐a‐chip device for analysis of amlodipine in biological fluids using peroxyoxalate chemiluminescence system
Author(s) -
Al Lawati Haider A. J.,
AlNadabi Mira M.,
Varma Gouri B.,
Suliman Fakhr Eldin O.,
AlAbri Hasnaa
Publication year - 2014
Publication title -
luminescence
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.428
H-Index - 45
eISSN - 1522-7243
pISSN - 1522-7235
DOI - 10.1002/bio.2675
Subject(s) - peroxyoxalate , chemiluminescence , fluorescamine , detection limit , chemistry , reagent , derivatization , oxalate , amine gas treating , chromatography , anhydrous , linear range , imidazole , calibration curve , nuclear chemistry , analytical chemistry (journal) , fluorescence , inorganic chemistry , organic chemistry , mass spectrometry , physics , quantum mechanics
A highly sensitive, rapid and economical method for the determination of amlodipine (AM) in biological fluids was developed using a peroxyoxalate chemiluminescence (CL) system in a lab‐on‐a‐chip device. Peroxyoxalate‐CL is an indirect type of CL that allows the detection of native fluorophores or compounds derivatized with fluorescent labels. Here, fluorescamine was reacted with AM, and the derivatization product was used in a bis ‐(2,4,6‐trichlorophenyl)oxalate‐CL system. Fluorescamine reacts selectively with aliphatic primary amine at neutral or basic pH. As most of the calcium channel blocker and many cardiovascular drugs do not contain primary amine, the developed method is highly selective. The parameters that influenced the CL signal intensity were studied carefully. These included the chip geometry, pH, concentration of reagents used and flow rates. Moreover, we confirmed our previous observation about the effects of imidazole, which is commonly used in the bis ‐(2,4,6‐trichlorophenyl)oxalate‐CL system as a catalyst, and found that the signal was significantly improved when imidazole was absent. Under optimized conditions, a calibration curve was obtained with a linear range (10–100 µg/L). The limit of detection was 3 µg/L, while the limit of quantification was 10 µg/L. Finally the method was applied for the determination of AM in biological fluids successfully. Copyright © 2014 John Wiley & Sons, Ltd.