Premium
Empirical model to simulate morphology of electrospun polycaprolactone mats
Author(s) -
Yousefi S. H.,
Tang C.,
Tafreshi H. Vahedi,
Pourdeyhimi B.
Publication year - 2019
Publication title -
journal of applied polymer science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.575
H-Index - 166
eISSN - 1097-4628
pISSN - 0021-8995
DOI - 10.1002/app.48242
Subject(s) - polycaprolactone , electrospinning , materials science , composite material , nanofiber , fiber , porosity , morphology (biology) , microstructure , polymer , genetics , biology
This work is the first to report a study aimed at generating 3D virtual geometries that represent the microstructure of an electrospun fibrous mat comprised curly fibers. Polycaprolactone (PCL) mats are considered in our study as an example of such fibrous structures. We started with simulating the formation of PCL filaments and observed good agreement between the predicted and measured fiber diameters. In the absence of quantitative information about the shape of a curly PCL fiber, we treated these fibers as arrays of beads arranged on epitrochoid profiles. We then used the fiber deposition diameter and velocity in a mass‐spring‐damper (MSD) model to generate 3D fibrous geometries comprised hundreds of such curly fibers. The damping and spring constants in the MSD model were obtained through calibration with experimental data reported for single electrospun PCL nanofibers. The size of the epitrochoid‐like fibers was obtained empirically through matching the average thickness of the resulting mats with those measured experimentally. With the calibrated code, we studied the effects of electrospinning conditions on the porosity of PCL nanofiber mats. It was found that increasing the voltage or decreasing the needle‐to‐collector distance results in PCL mats with thicker fibers, and consequently, lower porosities. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136 , 48242.