Premium
Influence of cure conditions on out‐of‐autoclave bismaleimide composite laminates
Author(s) -
Anandan Sudharshan,
Dhaliwal Gurjot S.,
Samaranayake V. A.,
Chandrashekhara K.,
Berkel Thomas R.,
Pfitzinger Doug
Publication year - 2016
Publication title -
journal of applied polymer science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.575
H-Index - 166
eISSN - 1097-4628
pISSN - 0021-8995
DOI - 10.1002/app.43984
Subject(s) - materials science , composite material , thermosetting polymer , autoclave , composite number , composite laminates , epoxy , glass transition , void (composites) , polymer , metallurgy
Bismaleimides (BMI) are thermosetting polymers that are widely used in the aerospace industry due to their good physical properties at elevated temperatures and humid environments. BMI‐based composites are used as a replacement for conventional epoxy resins at higher service temperatures. Out‐of‐Autoclave (OOA) processing of BMI composites is similar to that of epoxies but requires higher cure temperatures. Polymer properties such as degree of cure and crosslink density are dependent on the cure cycle used. These properties affect mechanical strength as well as glass transition temperature of the composite. In the current research, carbon fiber/BMI composite laminates were manufactured by OOA processing. The void content was measured using acid digestion techniques. The influence of cure cycle variations on glass transition temperature and mechanical strength was investigated. Properties of manufactured specimens were compared with that of conventional autoclave cured BMI composites. Laminates fabricated via OOA processing exhibited properties comparable to that of autoclave cured composites. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133 , 43984.