Premium
Polyimide fibers prepared by a dry‐spinning process: Enhanced mechanical properties of fibers containing biphenyl units
Author(s) -
Wang Shihua,
Dong Jie,
Li Zhentao,
Xu Yuan,
Tan Wenjun,
Zhao Xin,
Zhang Qinghua
Publication year - 2016
Publication title -
journal of applied polymer science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.575
H-Index - 166
eISSN - 1097-4628
pISSN - 0021-8995
DOI - 10.1002/app.43727
Subject(s) - pyromellitic dianhydride , bpda , polyimide , materials science , spinning , ultimate tensile strength , fiber , polymer , thermal stability , biphenyl , composite material , modulus , polymer chemistry , chemical engineering , chemistry , organic chemistry , layer (electronics) , engineering
Polyimide (PI) fibers with enhanced mechanical properties and high thermal and dimensional stability were prepared via a two‐step dry‐spinning process through the introduction of 3,3′,4,4′‐biphenyl tetracarboxylic dianhydride (BPDA) containing biphenyl units into rigid homopolyimide of pyromellitic dianhydride (PMDA) and 4,4′‐oxydianiline. The attenuated total reflectance–Fourier transform infrared spectra results imply that the incorporated BPDA moieties accelerate the imidization process and increase the imidization degree (ID) of the precursor fibers; this was attributed to the increased molecular mobility of the polymer chains. Two‐dimensional wide‐angle X‐ray diffraction spectra indicated that the prepared PI fibers possessed a well‐defined crystal structure and polymer chains in the crystalline region were highly oriented along the fiber axis. The PI fiber, with the molar ratio of PMDA/BPDA being 7/3, showed optimum tensile strength and modulus values of 8.55 and 73.21 cN/dtex, respectively; these were attributed to the high IDs and molecular weights. Meanwhile, the PI fibers showed better dimensional stability than the commercial P84 fiber, and this is beneficial for its security applications. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133 , 43727.