Premium
Inherent porous structure modified by titanium dioxide nanoparticle incorporation and effect on the fouling behavior of hybrid poly(vinylidene fluoride) membranes
Author(s) -
Younas Hassan,
Shao Jiahui,
Bai Hongwei,
Liu Liyan,
He Yiliang
Publication year - 2016
Publication title -
journal of applied polymer science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.575
H-Index - 166
eISSN - 1097-4628
pISSN - 0021-8995
DOI - 10.1002/app.43265
Subject(s) - membrane , fouling , materials science , fluoride , titanium dioxide , chemical engineering , nanoparticle , porosity , biofouling , polymer chemistry , composite material , chemistry , nanotechnology , inorganic chemistry , biochemistry , engineering
The incorporation of nanoparticles (NPs) into a casting solution is a widely used practice for controlling the membrane fouling tendency, but the specific role of NPs in fouling control from an internal porous structure optimization has seldom been investigated. In this study, we evaluated the specific role of titanium dioxide (TiO 2 )–NPs (Degussa P25) in mitigating membrane organic fouling. We prepared the membranes by tailoring the concentrations of the NPs well; this resulted in an optimized membrane microstructure consisting of fingerlike voids (beneath the skin layer of the membrane) and spongy voids (adjacent to the fingerlike voids). The NP incorporation induced the formation of spongy voids beneath the skin layer, and the increase in the NP concentration increased the formation of spongy voids. Moreover, surface images obtained by scanning electron microscopy, X‐ray photoelectron spectroscopy results, and contact angles confirmed that TiO 2 –NPs were almost absent on the skin layer. Antifouling experiments were performed with a model organic foulant in two flow orientations [fingerlike voids facing the retentate (FVR) and spongy voids facing the retentate (SVR)]. The results show that the membrane fluxes in FVR decreased more than those in SVR. The membrane with 1.5 wt % TiO 2 operated in SVR exhibited the lowest flux decline; this suggested that spongy voids with TiO 2 exposure could mitigate fouling to a greater extent. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133 , 43265.