Premium
Crosslinked epoxy microspheres: Preparation, surface‐initiated polymerization, and use as macroporous silica porogen
Author(s) -
Yu Xiangping,
Zhang Chongyin,
Ni Yong,
Zheng Sixun
Publication year - 2012
Publication title -
journal of applied polymer science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.575
H-Index - 166
eISSN - 1097-4628
pISSN - 0021-8995
DOI - 10.1002/app.38339
Subject(s) - epoxy , materials science , polymerization , glycidyl methacrylate , chemical engineering , atom transfer radical polymerization , thermosetting polymer , surface modification , polymer chemistry , composite material , polymer , engineering
Abstract In this article, we report the preparation of crosslinked epoxy microspheres with diameters of 5–10 μm prepared via phase‐inverted phase separation induced by polymerization in the thermosetting blend of epoxy and poly(ε‐caprolactone). The surfaces of the epoxy microspheres were functionalized to bear 2‐bromopropionyl groups, which were further used as initiators to obtain poly(glycidyl methacrylate) (PGMA) grafted epoxy microspheres via the surface‐initiated atom transfer radical polymerization approach. The PGMA‐grafted epoxy microspheres were then employed to react with 3‐aminopropyltrimethoxylsilane (APTMS) to obtain the functionalized epoxy microspheres, the surface of which contained a great number of trimethoxysilane groups. A co‐sol–gel process between the APTMS‐functionalized epoxy microspheres and tetraethoxysilane was performed, and organic–inorganic glassy solids were obtained. The organic–inorganic glasses were used as precursors for accessing macroporous silica materials via pyrolysis at elevated temperatures. The hierarchical porosity of the resulting macroporous silica was investigated by means of field emission scanning electronic microscopy, transmission electronic microscopy, and surface‐area Brunauer–Emmett–Teller (BET) measurements. We found that the macroporous silica possessed BET surface areas in the range 183.9–235.2 m 2 /g, depending on the compositions of their precursors. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013