z-logo
Premium
The effect of electrode configuration and substrate material on the mass deposition rate of electrospinning
Author(s) -
Stanger Jonathan,
Tucker Nick,
Wallace Andrew,
Larsen Nigel,
Staiger Mark,
Reeves Roger
Publication year - 2009
Publication title -
journal of applied polymer science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.575
H-Index - 166
eISSN - 1097-4628
pISSN - 0021-8995
DOI - 10.1002/app.29663
Subject(s) - electrode , materials science , electrospinning , fiber , deposition (geology) , vinyl alcohol , substrate (aquarium) , composite material , polymer , analytical chemistry (journal) , chemical engineering , polymer chemistry , chemistry , chromatography , engineering , biology , paleontology , oceanography , sediment , geology
Poly(vinyl alcohol) (PVOH) was electrospun using different methods to charge the polymer solution. A positive high voltage relative to the collecting electrode significantly increased the fiber deposition rate. Electron microscopy showed that approximately half of the increase in fiber mass was due to thicker fibers being deposited. The current flowing from the grounded electrode was measured to determine the charge carried on the PVOH jet. This showed that for a positive voltage charging condition there is a much larger current and hence more charge carriers generated in the PVOH solution. As a result, more mass is ejected from the Taylor cone, implying that a positive voltage also produces longer fiber for a given time period. We also tested whether different substrate materials caused any variation when the charging conditions were changed. Statistically significant variation between substrates was only found when the substrate was an insulator and was expected to support a high‐deposition rate. This confirms the view that the PVOH fiber arrives at the collecting electrode carrying a charge that must be neutralized, otherwise a repulsive charge will form where the fiber is deposited and some fiber will be lost to any alternative earth. In electrospraying, charge carriers are generated using associated redox reactions. Thus, for electrospinning a lack of symmetry in these reactions may result in the generation of different quantities of charge carriers in the PVOH solution and changes in the mass deposition rate of electrospun fiber. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009

This content is not available in your region!

Continue researching here.

Having issues? You can contact us here