Preparation and performances of ethylene–propylene–diene terpolymer/acrylic rubber reinforced with a dough‐modeling compound | Zendy

Wu Weili | Zendy; Chen Dajun | Zendy

Premium

Preparation and performances of ethylene–propylene–diene terpolymer/acrylic rubber reinforced with a dough‐modeling compound

Author(s) -

Wu Weili,

Chen Dajun

Publication year - 2007

Publication title -

journal of applied polymer science

Language(s) - English

Resource type - Journals

SCImago Journal Rank - 0.575

H-Index - 166

eISSN - 1097-4628

pISSN - 0021-8995

DOI - 10.1002/app.27215

Subject(s) - materials science , vulcanization , shore durometer , composite material , ethylene propylene rubber , copolymer , natural rubber , epdm rubber , ultimate tensile strength , composite number , polymer

A novel composite was prepared by the addition of a dough‐modeling compound (DMC) reinforcement and an ethylene–propylene–diene terpolymer (EPDM)/acrylic rubber (ACM) matrix. We studied the DMC/EPDM/ACM mass ratio and vulcanizing process by testing the tensile strength, Shore A hardness, elongation at break, and wear and thermal properties. The results show that the mechanical properties, thermal properties, and wear resistance of the composites were good when the DMC/EPDM/ACM mass ratio was 70/25/75 and the cure conditions were 180°C under 10 MPa for 25 min. The crosslinking structure of the composites was studied by IR, and this further proved the interaction between DMC, ACM, and EPDM. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008

This content is not available in your region!

Continue researching here.

Having issues? You can contact us here

Accelerating Research