Premium
Preparation and properties of recycled HDPE/clay hybrids
Author(s) -
Lei Yong,
Wu Qinglin,
Clemons Craig M.
Publication year - 2006
Publication title -
journal of applied polymer science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.575
H-Index - 166
eISSN - 1097-4628
pISSN - 0021-8995
DOI - 10.1002/app.25435
Subject(s) - high density polyethylene , materials science , exfoliation joint , ultimate tensile strength , crystallinity , composite material , crystallization , thermal stability , polyethylene , chemical engineering , graphene , engineering , nanotechnology
Hybrids based on recycled high density polyethylene (RHDPE) and organic clay were made by melt compounding. The influence of blending method, compatibilizers, and clay content on clay intercalation and exfoliation, RHDPE crystallization behavior, and the mechanical properties of RHDPE/clay hybrids were investigated. Both maleated polyethylene (MAPE) and titanate could improve the compatibilization of RHDPE and clay. RHDPE/clay hybrids containing completely exfoliated clay were obtained using a two‐step blending method. Without compatibilizers, the clay could not be exfoliated, and it lowered the crystallization peak temperature, crystallinity level, and the long period of RHDPE. MAPE and clay layers could act as heterogeneous nucleating agents for RHDPE. The titanate had a little influence on crystallization behavior of RHDPE. Adding clay to RHDPE reduced the impact strength but had little influence on the tensile strength. Both the storage and loss moduli increased with up to 5% of clay in hybrids containing CAPS, and there was an about 44% increase in impact strength of RHDPE/clay hybrid containing 5% MAPE compared with that of the hybrid containing no MAPE. The clay presence lowered the thermal stability of RHDPE. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3056–3063, 2007