Premium
Secondary crystallization and premelting endo‐ and exotherms in oriented polymers
Author(s) -
Correale S. T.,
Murthy N. S.
Publication year - 2006
Publication title -
journal of applied polymer science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.575
H-Index - 166
eISSN - 1097-4628
pISSN - 0021-8995
DOI - 10.1002/app.23267
Subject(s) - lamellar structure , crystallization , materials science , differential scanning calorimetry , annealing (glass) , crystallite , amorphous solid , crystallography , polymer , chemical engineering , supercooling , nucleation , polymer chemistry , composite material , chemistry , thermodynamics , organic chemistry , physics , engineering , metallurgy
Crystallization in polyamide 6 (nylon 6) fibers during annealing was studied in detail by following the changes that occurred in the neighborhood of crystalline relaxation temperatures, by using wide‐ and small‐angle X‐ray scattering and differential scanning calorimetry (DSC). Two distinct crystallization regimes were observed depending on whether annealing was carried out below or above onset of crystalline relaxation at ∼190°C. In fibers annealed below 190°C, minor melting peaks were followed by exothermic transitions. These were attributed to ∼1.5% (by weight) of microcrystals formed during annealing that melt and recrystallize during the DSC scan. These microcrystals are nucleated from unoriented amorphous chains between the lamellar stack within a fibril, and are shown to account for the observed increase in the crystalline orientation and decrease in permeability. Fibers annealed above 190°C did not show the exotherm and had significantly fewer microcrystals. The crystallization in this regime was attributed to the growth of existing lamellae, as evidenced by the increase in crystallite size, crystalline density, crystalline orientation, lamellar spacing, and lamellar intensity. The changes at annealing temperatures >190°C are accompanied by increased dyeability, indicative of more open amorphous regions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 447–454, 2006