Premium
Free‐radical grafting of acrylic acid onto isotactic polypropylene using styrene as a comonomer in supercritical carbon dioxide
Author(s) -
Dong Qingzhi,
Liu Ying
Publication year - 2004
Publication title -
journal of applied polymer science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.575
H-Index - 166
eISSN - 1097-4628
pISSN - 0021-8995
DOI - 10.1002/app.20238
Subject(s) - comonomer , surface modification , tacticity , polymer chemistry , materials science , supercritical fluid , supercritical carbon dioxide , azobisisobutyronitrile , grafting , styrene , monomer , radical initiator , polymer , radical polymerization , chemical engineering , polymerization , chemistry , copolymer , composite material , organic chemistry , engineering
Free‐radical grafting of acrylic acid (AAc) onto isotactic polypropylene (iPP) using styrene (St) as a comonomer in supercritical carbon dioxide (SCCO 2 ) medium was studied. The effects of temperature and pressure of reaction on functionalization degree (grafting degree of AAc) of the products were analyzed. The increase of reaction temperature increases the diffusion of monomers and radicals in the disperse reaction system of SCCO 2 . In addition, the increase of temperature accelerates the decomposition rate of 2,2′‐azobisisobutyronitrile (AIBN), thus promoting grafting reaction. It was also observed that functionalization degree of the products decreases with the increase of pressure of SCCO 2 in the range of experiment. The effects of comonomer St on the functionalization degree of the products were investigated. The AAc graft degree of the resulting polymer was drastically higher in the present of St. It reached a maximum when the mass ratio of St and AAc was about 0.7 : 1. Because AAc is not sufficiently reactive toward iPP macroradicals, it would be helpful to use a second monomer that can react with them much faster than AAc. St preferentially reacts with the iPP macroradicals to form more stable styrene macroradicals, which then copolymerize with AAc to form branches. The highest functionalization degree was obtained when the AIBN was 0.75 wt %. When the initiator was used excessively, the functionalization degree decreased because of severe chain degradation of the iPP backbone. The morphologies of pure iPP and grafted iPP are different under the polarizing optical microscope. The diameter of the pure iPP spherulites is 20–38 μ and that of the grafted iPP spherulites is reduced with the increase of the functionalization degree of the products. This is proposed to be because the polar grafts formed during the reaction would have a tendency to associate in the hydrophobic PP environment. This might preserve some of the local crystalline order that existed during the reaction in the swollen iPP phase. It can be proven by a DSC cooling investigation that the crystallization temperature increased as the functionalization degree increased. This is proposed to be because the side‐chain of grafting polymer helps to bring about the heterogeneous nucleation in grafting polymer. Therefore, a large number of nuclei can emerge to a lesser supercooling degree. It can be also proven that the percent crystallization decreased as the functionalization degree increased, probably due to the grafted branches, which disrupted the regularity of the chain structure and increased the spacing between the chains. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2203–2210, 2004