Premium
Determination of the interfacial mass transfer coefficient of vinyl acetate monomer diffusion into poly(vinyl acetate) and polystyrene latex particles stabilized with different stabilization mechanisms using a vapor phase addition method
Author(s) -
Kim JoongIn,
Vanderhoff John W.,
Klein Andrew
Publication year - 1995
Publication title -
journal of applied polymer science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.575
H-Index - 166
eISSN - 1097-4628
pISSN - 0021-8995
DOI - 10.1002/app.1995.070580207
Subject(s) - monomer , vinyl acetate , polymer chemistry , polystyrene , polymer , diffusion , chemical engineering , pulmonary surfactant , glass transition , particle (ecology) , electrolyte , materials science , phase (matter) , chemistry , organic chemistry , thermodynamics , copolymer , physics , oceanography , electrode , engineering , geology
A vapor phase monomer addition method was used to measure the monomer transfer rate into latex particles. The classical mathematical model for the diffusion process was used to calculate the overall mass transfer coefficients of monomer between the vapor and the water phases, and between the water and the polymer particle phases. At the initial stage of the monomer transfer into the glassy polystyrene latex particles at 60°C, the rate‐determining step was the monomer transfer inside the polymer. As more monomer transferred into the latex particles and the glass transition temperature of the swollen latex particles decreased below the experimental temperature, the rate‐determining step became the monomer transfer across the interfacial surfactant layer. This transition was not observed with poly(vinyl acetate) latex, which was rubbery at the experimental temperature. The diffusion coefficients calculated were in the order of 10 −13 to 10 ‐14 cm 2 /s. These low values correspond to molecular diffusion of small molecules through a solid or glassy membrane. This was attributed to the resistance of the adsorbed surfactant layer. The mass transfer rates into latex particles stabilized with ionic, nonionic surfactants, and a water‐soluble polymer were compared. In the case of the ionic surfactant, sodium dodecyl sulfate, when a large amount of electrolyte was added, the mass transfer rate decreased compared to the electrolyte addition free case. This was attributed to the formation of a “condensed” layer of adsorbed surfactant. Adsorbed nonionic surfactant or water‐soluble polymer showed larger resistance to monomer transport compared to the ionic surfactant layer. © 1995 John Wiley & Sons, Inc.