Premium
Grafting of vinyl monomers by the xanthate method
Author(s) -
Graczyk Tomasz
Publication year - 1988
Publication title -
journal of applied polymer science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.575
H-Index - 166
eISSN - 1097-4628
pISSN - 0021-8995
DOI - 10.1002/app.1988.070360608
Subject(s) - oxygen , monomer , xanthate , chemistry , radical , diffusion , reaction rate , polymer chemistry , cellulose , redox , chemical engineering , inorganic chemistry , organic chemistry , polymer , catalysis , physics , engineering , thermodynamics
The removal of oxygen from swollen pulp is very difficult. At least 1–2 h of purging with oxygen‐free nitrogen or argon is required as well as efficient mixing and a low concentration of pulp (not higher than 1%). During the grafting reaction, in which the xanthate cellulose is a part of the redox system, the concentration of oxygen falls to zero and stabilizes at this level even if air is purged through the system or a higher rate of stirring is applied. Primary sulfur radicals created in the reaction of the xanthated groups with H 2 O 2 are further oxidized by H 2 O 2 or by particles of oxygen dissolved in the reaction mixture. The observed increase in reaction caused by an increase in stirring speed is due to the higher rate of diffusion of hydrophobic monomers as well as the diffusion of oxygen to active centers at high stirring speed. The low rate of grafting at lower agitation speeds is caused by agglomeration of monomer molecules to bigger particles and, as a result, decreased diffusion of monomer to active centers. Above 300 rpm, the effect of monomer diffusion diminishes and further increase in conversion is caused only by a higher rate of oxygen diffusion to active centers from reaction mixture or passing gas. However, above a certain level of oxygen, the effect of termination by oxygen prevails and the rate of reaction decreases. Additives increase the conversion in the lower range of agitation speed only. The application of additives and agitation are two equivalent methods, both of which lead to an increase in conversion in the lower range of stirring speed.