Premium
Composite hollow fiber membranes
Author(s) -
Cabasso Israel,
Tamvakis Anthony P.
Publication year - 1979
Publication title -
journal of applied polymer science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.575
H-Index - 166
eISSN - 1097-4628
pISSN - 0021-8995
DOI - 10.1002/app.1979.070230521
Subject(s) - polysulfone , materials science , interfacial polymerization , furfuryl alcohol , composite number , composite material , membrane , curing (chemistry) , fiber , coating , chemical engineering , polymerization , hollow fiber membrane , polymer , chemistry , organic chemistry , biochemistry , monomer , engineering , catalysis
Composite polysulfone hollow fibers consisting of a polysulfone porous substrate coated with crosslinked polyethyleneimine (PEI) or furan resin are reported. These composite hollow fibers are analogous to the flat‐sheet composite membranes known as NS‐100 and NS‐200. The surface structure of the porous substrate was rigorously studied before and after coating. Scanning electron microscope observations and reverse osmosis transport studies showed that the support fiber must have surface pore diameters of less than 0.2 μm to obtain a durable composite hollow fiber membrane. The curing process would normally follow in situ condensation of the PEI or the cationic polymerization of the furfuryl alcohol. However, since both the dense layer and surface of the porous substrate contract when exposed to the curing temperature (110–150°C), it was found to be profitable to cure the hollow fiber before applying the coating. When tested in a reverse osmosis rig, PEI/TDI‐coated polysulfone hollow fiber bundles displayed 98% salt rejection and a flux of 5–7 gfd for a feed solution of 10,000 ppm NaCl at a hydraulic pressure of 400 psi. A new method of depositing furan resin on the polysulfone hollow fiber is described. The furfuryl alcohol is instantaneously polymerized by exposing the alcohol‐soaked fiber to a 60% solution of concentrated sulfuric acid. It has been demonstrated that in such a polymerization procedure a dense, semipermeable layer is formed on top of the porous substrate; the resulting composite hollow fiber membrane yields salt rejections higher than 98% when tested under the above reverse osmosis conditions.