Premium
Melt/solution processable conducting polyaniline: Elastomeric blends with EVA
Author(s) -
Paul Raji K.,
Pillai C. K. S.
Publication year - 2002
Publication title -
journal of applied polymer science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.575
H-Index - 166
eISSN - 1097-4628
pISSN - 0021-8995
DOI - 10.1002/app.10408
Subject(s) - materials science , polyaniline , emulsion polymerization , elastomer , cardanol , polymerization , polymer chemistry , chemical engineering , conductive polymer , sulfonic acid , fourier transform infrared spectroscopy , copolymer , composite material , polymer , epoxy , engineering
Polyaniline (PANI) protonated with dopant, the sulfonic acid of 3‐pentadecylphenoxyacetic acid (SPDPAA; synthesized from an inexpensive naturally existing biomonomer, cardanol), was blended with an elastomeric polymer, the ethylene vinyl acetate (EVA) copolymer. Blending was performed either by emulsion polymerization of aniline into the EVA matrix or by the solution‐mixing method. Thin films were prepared by the conventional melt‐processing technique for an emulsion‐polymerized system and by the solution‐casting method for a solution‐mixed system. In the case of the emulsion‐polymerized system, the percolation threshold occurs at a very low weight percentage of PANI, and a maximum conductivity value of 0.85 S cm −1 was obtained for 28.5 wt % of PANI. These elastomeric conducting blends were characterized by elemental analysis, FTIR and UV‐visible spectral analysis, conductivity measurements, SEM, XRD, tensile properties, TGA, and DSC. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1438–1447, 2002; DOI 10.1002/app.10408