Premium
Effect of liquid sheet and gas streams characteristics on the instability of a hollow cone spray using an improved linear instability analysis
Author(s) -
Hosseinalipour Seyed Mostafa,
Ghorbani Ramin,
Karimaei Hadiseh
Publication year - 2015
Publication title -
asia‐pacific journal of chemical engineering
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.348
H-Index - 35
eISSN - 1932-2143
pISSN - 1932-2135
DOI - 10.1002/apj.1939
Subject(s) - instability , breakup , mechanics , conical surface , materials science , jet (fluid) , weber number , composite material , physics , turbulence , reynolds number
The breakup of a liquid sheet or jet is led to atomization phenomenon. The liquid sheet surface instability controls spray formation and determines the spray characteristics. Therefore, the instability study of the liquid jet has attracted a lot of attentions so that a lot of works have been carried out on this subject. The instability study of a swirling annular liquid sheet exposed to inner and outer gas streams is represented in the paper. A three‐dimensional flow for the liquid sheet and a two‐dimensional flow for inner and outer gas streams have been considered. In previous studies, a cylindrical liquid sheet has been considered, but in this study, the instability theory is implemented on a conical liquid sheet for different cone angles. The effects of swirl velocity of the liquid sheet and axial velocity of the gas streams on the sheet instability and breakup length have been investigated. Results show that liquid swirl Weber number has a destabilizing effect on a conical liquid jet. Study of the effect of ambient pressure shows that disturbance growth rate increases with increasing gas‐to‐liquid density ratio. The effect of spray angle on the instability of the liquid sheet is a very important issue in combustion chamber design especially when the available space and/or weight is limited. Higher spray angle enhances the instability of the liquid sheet, and it leads to a shorter breakup length and larger ligaments. Sheet thickness is another parameter that has been considered. Increasing sheet thickness enhances the sheet instability. These behaviors are consistent with the experimental observations. © 2015 Curtin University of Technology and John Wiley & Sons, Ltd.