Premium
Curvature and parametric sensitivity in models for adsorption in micropores
Author(s) -
Saito A.,
Foley H. C.
Publication year - 1991
Publication title -
aiche journal
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.958
H-Index - 167
eISSN - 1547-5905
pISSN - 0001-1541
DOI - 10.1002/aic.690370312
Subject(s) - adsorption , microporous material , molecular sieve , curvature , argon , zeolite , materials science , cracking , thermodynamics , porosity , chemistry , composite material , catalysis , organic chemistry , geometry , mathematics , physics
Abstract The sensitivity of the calculated micropore size of zeolite Y in a fluidized cracking catalyst based on empirical models for argon adsorption has been tested by examining the effect of curvature and by systematically verifying the magnitude of physical constants in the model equations. With a consistent set of physical parameters the slit model provided a pore size value of 0.45 nm, while the new cylindrical models provided values of 0.69 and 0.74 nm. The latter values are found to correspond well with the known aperture size of zeolite Y, 0.74 nm. By separately varying the magnitudes of five of the physical constants in the model over a range of ±30%, it was concluded that the diameter of the oxide ion at the surface had a large effect on the calculated pore size, while the other parameters had only moderate to small effects. Preliminary application of the cylindrical pore model to isotherms of argon on other zeolites and molecular sieves leads to promising results, especially for medium to large pore zeolites. These results suggest that the cylindrical pore model is a useful means for the transformation of argon adsorption data on a zeolite into a micropore size distribution.