Premium
Self‐Supporting Porous CoP‐Based Films with Phase‐Separation Structure for Ultrastable Overall Water Electrolysis at Large Current Density
Author(s) -
Yu Xiangtao,
Wang Mingyong,
Gong Xuzhong,
Guo Zhancheng,
Wang Zhi,
Jiao Shuqiang
Publication year - 2018
Publication title -
advanced energy materials
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 10.08
H-Index - 220
eISSN - 1614-6840
pISSN - 1614-6832
DOI - 10.1002/aenm.201802445
Subject(s) - materials science , electrolysis , chemical engineering , nanoporous , catalysis , current density , electrolysis of water , oxygen evolution , porosity , electrocatalyst , phase (matter) , etching (microfabrication) , electrochemistry , nanotechnology , electrode , chemistry , layer (electronics) , composite material , electrolyte , organic chemistry , physics , quantum mechanics , engineering
Stable non‐noble metal electrocatalysts are of essential importance for industrial water electrolysis. Powdery electrocatalysts loaded on current collectors by binders are often designed, but easily fall off due to strong attack by bubbles at an industrial large current density (>400 mA cm −2 ). A novel strategy is developed to construct a self‐supported dual‐phase porous Co 2 P–Co 3 O 4 film for oxygen evolution reaction (OER) and micro‐nanoporous Co 2 P film for hydrogen evolution reaction (HER) based on the electrodeposition of single‐phase porous CoP film on gas–liquid–solid interface, phase separation to Co 2 P–Co, and selective oxidation/etching of the Co phase. The self‐supported dual‐phase Co 2 P–Co 3 O 4 catalyst exhibits good electrocatalytic activity for OER. The overpotentials are 265 and 405 mV at 20 and 200 mA cm −2 , respectively. In addition, the self‐supported micro‐nanoporous Co 2 P catalyst shows high catalytic activity for HER due to large active area and good wettability. Both dual‐phase Co 2 P–Co 3 O 4 and micro‐nanoporous Co 2 P possess ultrastability, even at a large current density of 500 mA cm −2 due to the self‐supported structure. The cell voltage of water electrolysis using a self‐supported Co 2 P–Co 3 O 4 ||Co 2 P electrolyzer at 500 mA cm −2 is only about 3.36 ± 0.01 V, which is much lower than that (4.31 ± 0.05 V) of the IrO 2 –Ta 2 O 5 ||Pt electrolyzer.